English - 67Scanning and Switching between Anynet+ Devices1 Press the TOOLS button.Press the ENTER button to select Anynet+ (HDMI-CEC).2 Press the ▲ or ▼ button to select Device List, then pressthe ENTER button.® Anynet+ devices connected to the TV are listed.If you cannot find a device you want, press the red buttonto scan for devices.® Only when you set Anynet+ (HDMI-CEC) to On in theSetup menu, the Device List menu appears.3 Press the ▲ or ▼ button to select a particular device andpress the ENTER button. It is switched to the selecteddevice.® Switching to the selected devices may take up to 2 minutes. You cannot cancel the operation duringthe switching operation.® The time required to scan for devices is determined by the number of connected devices.® When the device scan is complete, the number of devices found are not displayed.® Although the TV automatically scans devices when it is turned on using the POWER button, devicesconnected when the TV is already on are not displayed in the device list. In this case, press the redbutton on the remote to search devices.® If you have selected an external device by pressing the SOURCE button, you cannot use the Anynet+function. Make sure to switch to an external Anynet+ device by using the TOOLS button.Anynet+ MenuThe Anynet+ menu changes depending on the type and status of the Anynet+ devices connectedto the TV.Anynet+ Menu DescriptionView TV Anynet+ mode changes to TV broadcast mode.Device List Shows the Anynet+ device list.(Device_Name) Menu Shows the connected device menus.E.g. If a DVD recorder is connected, the disc menu of the DVD recorder willappear.(Device_Name)OperationShows the play menu of the connected device.E.g. If a DVD recorder is connected, the play menu of the DVD recorder willappear.Record: (*recorder) Starts recording immediately using the recorder. (This is only available fordevices thatsupport the recording function.)(*recorder) ReserveRecordingEnables reserving a recording for the recorder. (This is only available fordevices that support the recording reservation function.)Stop Recording:(*recorder)Stops recording.Receiver Sound is output through the receiver.® If more than one recording device is connected, they are displayed as (*recorder) and if only onerecording device is connected, it will be represented as (*device_name).Continued...ReturnEnterMoveView TVDevice ListRecording : DVDRDVDR OperationReceiver : OnSetup
