English - 35Selecting the Sound Mode (depending on the model)The DUAL I-II button displays/controls the processing and output of the audio signal. When poweris switched on, the mode is automatically preset to either “DUAL-I” or “Stereo”, depending on thecurrent transmission.Easy Setting1 Press the TOOLS button on the remote control.2 Press the ▲ or ▼ button to select Dual I-II.3 Press the ◄ or ► button to select the required option.4 Press the EXIT or TOOLS button to exit.Type of broadcast On-screen indicationNICAMStereoRegular broadcast(Standard audio) Mono (Normal use)Regular + NICAMMono NICAM Mono(Normal)NICAM-Stereo NICAMStereoMono(Normal)NICAM Dual-I/II NICAMDual-1NICAMDual-2Mono(Normal)A2StereoRegular broadcast(Standard audio) Mono (Normal use)Zweisprachig oderDual-I/II Dual I Dual IIStereo Stereo Mono(Forced mono)¯ If the receiving conditions deteriorate, listening will be easier if the mode is set to Mono.If the stereo signal is weak and automatic switching occurs, switch to Mono. This function is only available in TV mode.Connecting Headphones (Sold separately)You can connect a set of headphones to your set if you wish to watch a TV program withoutdisturbing other people in the room.¯ When you insert the head set jack into the correspondingport, you can operate onlyDTV : Audio Language,Audio Format, Audio Description,Select Speaker, Sound ResetATV : Select Speaker, Sound ResetPIP : Sound Select, Sound Reset in Sound menu.¯ Prolonged use of headphones at a high volume maydamage your hearing.¯ You will not hear sound from the speakers when youconnect headphones to the TV.¯ The headphone volume and TV volume are adjustedseparately.TV Side PanelToolsAnynet+(HDMI-CEC)Picture Size : Auto WidePicture Mode : StandardSound Mode : StandardSleep Timer : OffSRS TS XT : OffEnergy Saving : OffDual I II ◄ Mono ►Move Adjust Exit15
