English - 9Installing Batteries in the Remote Control1 Lift the cover at the back of the remote control upward as shown in thefigure.2 Install two AAA size batteries.¯ Make sure to match the “+” and “–” ends of the batteries with thediagram inside the compartment. Using the remote control with the ON/OFF( ) light button set toOn will reduce the battery usage time.3 Close the cover as shown in the figure.¯Remove the batteries and store them in a cool and dry place if youwon’t be using the remote control for a long time. The remote controlcan be used up to about 23 feet from the TV. (Assuming typical TVusage, the batteries last for about one year.)¯If the remote control doesn’t work! Check the following:1. Is the TV power on?2. Are the plus and minus ends of the batteries reversed?3. Are the batteries drained?4. Is there a power cut, or is the power cord unplugged?5. Is there a special fluorescent light or a neon sign nearby?Switching Your Television On and OffThe mains lead is attached to the rear of the television.1 Plug the mains lead into an appropriate socket.¯The main voltage is indicated on the rear of the television and the frequency is 50 or 60Hz.2 Press the (Power) button (On/Off) on the front of the television or press the POWER button onthe remote control to switch the television on. The channel that you were watching last is re-selectedautomatically. If you have not yet stored any channels, no clear picture appears. Refer to “StoringChannels Automatically” on page 14 or “Storing Channels Manually” on pages 15~16.¯If the television is initially powered on, several basic customer settings proceed automatically.Refer to “Plug & Play Feature” on pages 10~11.3 To switch the television off, press the (Power) button (On/Off) on the front of the television or pressthe POWER button on the remote control.4 To switch the TV on, press the (Power) button (On/Off) on the front of the TV or press the POWERbutton or number buttons on the remote control.Viewing the Menus1 Press the MENU button.The main menu is displayed on the screen.Its left side has six icons: Picture, Sound, Channel,Setup, Input, and Application2 Press the ▲ or ▼ button to select one of the icons.Press the ENTER button to access the icon’s sub-menu.3 Press the ▲ or ▼ button to move to items in the menu.Press the ENTER button to enter items in the menu.4 Press the ▲/▼/◄/► button to change the selected items.Press the RETURN button to return to the previous menu.5 Press the EXIT button to exit from the menu.Mode : StandardCell Light : 7Contrast : 95Brightness : 45Sharpness : 50Colour : 50Tint (G/R) : G50/R50Detailed SettingsPicture
