English - 66Setting Up Anynet+The following settings help set the Anynet+ functions.To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On1 Press the MENU button. Press the ▲ or ▼ button to selectApplication, then press the ENTER button.2 Press the ▲ or ▼ button to select Anynet+ (HDMI-CEC),then press the ENTER button.3 Press the ▲ or ▼ button to select Setup, then press theENTER button.4 Press the ▲ or ▼ button to select Anynet+ (HDMI-CEC),then press the ENTER button.5 Press the ▲ or ▼ button to select On, then press theENTER button.® The Anynet+ (HDMI-CEC) function is enabled.® If you select Off, Anynet+ (HDMI-CEC) is disabled.® When the Anynet+ (HDMI-CEC) function is disabled,all the Anynet+ related operations are deactivated.Setting an Anynet+ Device to turn Off Automatically when the TV is Turned Off1 Press the ▲ or ▼ button to select Auto Turn Off, thenpress the ENTER button.2 Press the ▲ or ▼ button to select Yes, then press theENTER button.® The Auto Turn Off function is enabled.® If you select No, the Auto Turn Off function iscanceled.Press the EXIT button to exit.® The active source on the TV remote must be set to TVto use the Anynet+ function.® If you set Auto Turn Off to Yes, connected externaldevices are also turned off when the TV is turned off. Ifan external device is still recording, it may or may notturn off.Easy Setting1 Press the TOOLS button on the remote control.2 Press the ENTER button to select Anynet+ (HDMI-CEC).® The Anynet+ (HDMI-CEC) menus appear on thescreen.WISELINKAnynet+ (HDMI-CEC) ►ApplicationSetupAnynet+ (HDMI-CEC) :Auto Turn Off :ReturnEnterMoveOffOnSetupAnynet+ (HDMI-CEC) :Auto Turn Off :ReturnEnterMoveNoYesToolsMove EnterView TVAnynet+ (HDMI-CEC)Recording : DVDDVD MenuDVD MenuPicture Size : Auto WidePicture Mode : StandardSound Mode : Standard▼ExitDevice ListSetupReturnEnterMove
