Introduction_ 25Control panel overviewThis illustration may differ from your machine depending on its model.51234 561234[1] CLP-320(K)/CLP-321/CLP-325(K)/ CLP-326/CLP-320N(K)/CLP-321N1 Toner LEDs Shows the status of each toner cartridge (See "Status/ Toner LEDs" on page 26).2 Power button You can turn the power on and off with this button (See "Power button" on page 27).3 Cancel button Stops an operation at any time and there are more functions (See "Cancel button" on page 27).4 Status LED Shows the status of your machine (See "Status/ Toner LEDs" on page 26).5 Print Screenaa. CLP-320(K)/CLP-321/CLP-325(K)/ CLP-326 only.Prints the displayed screen of your monitor (See "Print screen button" on page 26).Demo Printbb. CLP-320N(K)/CLP-321N only.Prints a demo page (See "Demo print button" on page 27).[2] CLP-325W(K)/CLP-326W1 Toner LEDs Shows the status of each toner cartridge (See "Status/ Toner LEDs" on page 26).2 Power button You can turn the power on and off with this button (See "Power button" on page 27).3 Cancel button Stops an operation at any time and there are more functions (See "Cancel button" on page 27).4 Status LED Shows the status of your machine (See "Status/ Toner LEDs" on page 26).5 Wireless LED Shows the status of wireless network. When the LED on, the machine is connected wirelessly (See "Wireless LED"on page 26).6 WPS button If your wireless access point supports WPS (Wi-Fi Protected Setup™), you can configure the wireless networkconnection easily without a computer (See "Setting a wireless network with the WPS button" on page 41).
