Samsung CLP-320N User Manual

Also see for CLP-320 Series: Quick installation guide Parts catalog Service manual User guide

Contents

Network setup (CLP-320N(K)/CLP-321N/CLP-325W(K)/CLP-326W only)_ 35Printing network configuration reportYou can print a Network Configuration Report from the machine's controlpanel that will show the current machine’s network settings. This will helpyou to set up a network and troubleshoot problems.To print the report:In ready mode, press and hold the (cancel button) for about 5 seconds.You can find your machine’s MAC address and IP address.For example:• MAC Address: 00:15:99:41:A2:78• IP Address: 192.0.0.192Setting IP addressFirstly, you have to set up an IP address for network printing andmanagements. In most cases a new IP address will be automaticallyassigned by a DHCP (Dynamic Host Configuration Protocol) server locatedon the network.In a few situations the IP address must be set manually. This is called astatic IP and is often required in corporate Intranets for security reasons.• DHCP IP assignment: Connect your machine to the network, and wait afew minutes for the DHCP server to assign an IP address to themachine. Then, print the Network Configuration Report as explainedabove. If the report shows that the IP address has changed, theassignment was successful. You will see the new IP address in thereport.• Static IP assignment: Use SetIP program to change the IP addressfrom your computer.In an office environment, we recommend that you contact a networkadministrator to set this address for you.IPv4 configurationIPv4 setting using SetIP Program (Windows)This program is for manually setting the network IP address of yourmachine using its MAC address to communicate with the machine. AMAC address is the hardware serial number of the network interface andcan be found in the Network Configuration Report.For using SetIP program, disable the computer firewall before continuingby performing the following:1.Open Start > Control Panel.2.Double click Security Center.3.Click Firewall.4.Disable the firewall.Installing the program1.Insert the Printer Software CD-ROM provided with your machine.When the driver CD runs automatically, close that window.2.Start Windows Explorer and open the X drive. (X represents yourCD-ROM drive.)3.Double-click Application > SetIP.4.Double-click Setup.exe to install this program.5.Select a language, then click Next.6.Follow the instructions in the window and complete the installation.Starting the program1.Connect your machine to the network with a network cable.2.Turned on the machine.3.From the Windows Start menu, select All Programs > SamsungPrinters > SetIP > SetIP.4.Click on the icon (third from left) in the SetIP window to open theTCP/IP configuration window.5.Enter the machine’s new information into the configuration window asfollows. In a corporate intranet, you may need to have thisinformation assigned by a network manager before proceeding.•MAC Address: Find the machine’s MAC address from the NetworkConfiguration Report and enter it without the colons. Forexample, 00:15:99:29:51:A8 becomes 0015992951A8.•IP Address: Enter a new IP address for your printer.For example, if your computer’s IP address is 192.168.1.150,enter 192.168.1.X. (X is number between 1 and 254 other thanthe computer’s address.)•Subnet Mask: Enter a Subnet Mask.•Default Gateway: Enter a Default Gateway.6.Click Apply, and then click OK. The machine will automatically printthe Network Configuration Report. Confirm that all the settings arecorrect.7.Click Exit to close the SetIP program.8.If necessary, restart the computer’s firewall.IPv4 setting using SetIP Program (Macintosh)For using SetIP program, disable the computer firewall before continuingby performing the following:The path and UIs may differ by Mac OS version. Refer to the MacOS manual.1.Open System Preferences.2.Click Security.3.Click the Firewall menu.4.Turn firewall off.The following instructions may vary for your model.1.Connect your machine to the network with a network cable.2.Insert the Installation CD-ROM, and open the disk window, selectMAC_Installer > MAC_Printer > SetIP > SetIPApplet.html.3.Double click the file and Safari will automatically open, then selectTrust. The browser will open the SetIPApplet.html page that showsthe printer’s name and IP address information.4.Click on the icon (third from left) in the SetIP window to open theTCP/IP configuration window.5.Enter the machine’s new information into the configuration window asfollows. In a corporate intranet, you may need to have thisinformation assigned by a network manager before proceeding.•MAC Address: Find the machine’s MAC address from the NetworkConfiguration Report and enter it without the colons. For