Samsung CLP-320N User Manual

Also see for CLP-320 Series: Quick installation guide Parts catalog Service manual User guide

Contents

Network setup (CLP-320N(K)/CLP-321N/CLP-325W(K)/CLP-326W only)_ 343.network setup(clp-320n(k)/clp-321n/clp-325w(k)/clp-326wonly)This chapter gives you step-by-step instructions for setting up the network connected machine and software.This chapter includes:• Network environment• Introducing useful network programs• Using a wired network• Installing network connected machine’s driverNetwork environmentYou need to set up the network protocols on the machine to use it as yournetwork machine. You can set up the basic network settings through themachine's control panel or network setting programs.The following table shows the network environments supported by themachine:Item RequirementsNetwork interface • Ethernet 10/100 Base-TX• 802.11 b/g/n wireless LAN(CLP-325W(K)/CLP-326W only)Network operating system • Windows 2000/Server 2003 /Server2008/XP/Vista/7/Server 2008 R2• Various Linux OS• Mac OS X 10.3 ~ 10.6Network protocols • TCP/IPv4• DHCP, BOOTP• DNS, WINS, Bonjour, SLP, UPnP• Standard TCP/IP Printing (RAW), LPR,IPP• SNMPv 1/2/3, HTTP, IPSec• TCP/IPv6 (DHCP, DNS, RAW, LPR,SNMPv 1/2/3, HTTP, IPSec)See "IPv6 configuration" on page 36.Wireless security • Authentication: Open System, SharedKey, WPA Personal, WPA2 Personal(PSK)• Encryption: WEP64, WEP128, TKIP,AESIntroducing useful network programsThere are several programs available to setup the network settings easily innetwork environment. For the network administrator especially, managingseveral machines on the network is possible.Before using the programs below, set the IP address first.SyncThru™ Web ServiceWeb server embedded on your network machine, which allows you to:• Configure the network parameters necessary for the machine to connectto various network environments.• Customize machine settings.See "Using SyncThru™ Web Service" on page 68.SyncThru™ Web Admin ServiceA web-based machine management solution for network administrators.SyncThru™ Web Admin Service provides you with an efficient way ofmanaging network devices and lets you remotely monitor and troubleshootnetwork machines from any site with corporate internet access. Downloadthis program from http://solution.samsungprinter.com.SetIPThis utility program allows you to select a network interface and manuallyconfigure the IP addresses for use with the TCP/IP protocol.• See "IPv4 setting using SetIP Program (Windows)" on page 35.• See "IPv4 setting using SetIP Program (Macintosh)" on page 35.• See "IPv4 setting using SetIP Program (Linux)" on page 36.TCP/IPv6 is not supported by this program.Using a wired networkYou must set up the network protocols on your machine to use it on yournetwork. This chapter will show you how this is easily accomplished.You can use network after connecting network cable to a correspondingport on your machine.