Wireless network setup1692. Using a Network-Connected MachineCreating the infrastructure network1 Check wheter the USB cable is connected to the machine.2 Turn on your computer, access point, and machine.3 Insert the supplied software CD into your CD-ROM drive.If the installation window does not appear, click Start > All programs >Accessories > Run.X:\Setup.exe replacing “X” with the letter, which represents your CD-ROM drive and click OK.• For Windows 8,If the installation window does not appear, from Charms, selectSearch > Apps and search for Run. Type in X:\Setup.exe, replacing“X” with the letter that represents your CD-ROM drive and click OK.If “Tap to choose what happens with this disc.” pop-up windowappears, click the window and select Run Setup.exe.4 Review and accept the installation agreements in the installationwindow. Then, click Next.5 Select Wireless network connection on the Printer Connection Typescreen. Then, click Next.6 On the Are you setting up your printer for the first time? screen, selectYes, I will set up my printer's wireless network. Then, click Next.If your printer is already connected on the network, select No, myprinter is already connected to my network.7 After searching, the window shows the wireless network devices. Selectthe name (SSID) of the access point you want to use and click Next.
