Wireless network setup1872. Using a Network-Connected Machine- Subnet Mask: 255.255.0.0 (Use the computer’s subnet mask.)- Gateway: 169.254.133.113 When the window that tells you that the network cable connection isconfirmed appears, disconnect the network cable and click Next.If the network cable is connected, it may have trouble finding themachine when configuring the wireless network.14 The wireless network connects according to the network configuration.15 Wireless network set up is completed. After installation is finished, clickQuit.After completing the wireless network connection, you need to install amachine driver to print from an application (see "Installation for Mac" onpage 132).20Using a network cableMachines that do not support the network port will not be able to use thisfeature (see "Rear view" on page 19).Your machine is a network compatible machine. To enable your machine towork with your network, you will need to perform some configurationprocedures.• After completing the wireless network connection, you need to install amachine driver to print from an application (see "Installing driver overthe network" on page 141).• See your network administrator, or the person that set up your wirelessnetwork, for information about your network configuration.Items to prepare• Access point• Network-connected computer• Software CD that was provided with your machine• A machine installed with a wireless network interface• Network cable
