Samsung DCS-408 System Administration Manual

Also see for DCS-408: Programming manual Programming manual User guide Installation manual Installation manual

Contents

Samsung System Administration GuideDCS-408 & 408i November 200122Press TRSF to store and exit programmingORPress SPEAKER to store and advance to next MMC❍❍❍❍ Assign Speed Dialling Blocks[MMC 606]Your system can have up to 300 speed dial entries assigned (30 blocks of 10 numberseach). Up to 200 of these can be allocated as system speed dials, and the remainderallocated to stations as personal speed dials, with a maximum of 50 numbers per sta-tion. Consequently, the more system speed dials that are allocated, the fewer speeddials are available for personal use. When assigning speed dials, this MMC displaysthe number of system or personal blocks that are currently assigned and also showsthe number remaining to be assigned, called the ‘Free List’. This program also allowsyou to delete blocks of speed dial if required.ACTION DISPLAY1. Open customer programming and select 606 FREE LIST:60SYSTEM:202. Press right soft key to advance cursor FREE LIST:60SYSTEM:203. Press UP or DOWN key to select SYSTEM to program systemspeed dials, or EXT (extension) to program personal speeddialsIf you select EXT, go to step 5If you select SYSTEM, press right soft key and go to step 4FREE LIST:60SYSTEM:204. Enter valid number of blocks to assignORPress UP or DOWN key to select and press right soft keyORPress HOLD to delete block(s)System returns to step 3 to make another selection(If finished go to step 7)5. Enter desired EXT (extension) number via keypad (e.g., 205)ORPress UP or DOWN key to make selection and press right softkey to advance cursorFREE LIST:60EXT205:16. Enter valid number of blocks (0–5)ORPress UP or DOWN key to make selectionORPress HOLD key to delete block(s)FREE LIST:60EXT205:57. Press TRSF to store and exitORPress SPEAKER to store and advance to next MMC