Samsung DCS-408 System Administration Manual

Also see for DCS-408: Programming manual Programming manual User guide Installation manual Installation manual

Contents

Samsung System Administration GuideDCS-408 & 408i November 200128Program Authorisation Codes[MMC 707]You can add or change authorisation code entries. These codes are used to authorisecalls made by stations. Each code is associated with a class of service which is acti-vated when the code is entered.Note: To set up forced authorisation codes, see Program Forced Account and AuthorisationCodes.Program KeysVOLUME UP & DOWN - Used to select entry number.KEYPAD - Used to enter the authorisation code (allowable digits 0–9).SOFT KEYS - Move cursor left and right.SPEAKER - Used to store data and advance to next program.HOLD - Used to clear data.ACTION DISPLAY1. Open customer programming and select 7072. Dial the code index entry (e.g., 005)ORPress UP or DOWN to select the entry number and pressthe right soft key to move the cursor3. Enter the authorisation code (max 4 digits) via the keypadand press the right soft key to move the cursor4. Enter class of service no. 01–30 (e.g. 05)ORPress UP or DOWN to select COS number5. Press the right soft key to return to step 2ORPress TRSF to store and exit programmingORPress SPEAKER to store and advance to the next MMCAUTHOR CODE (001)CODE: COS:01AUTHOR CODE (005)CODE:_ COS:01AUTHOR CODE (005)CODE:1234 COS:01AUTHOR CODE (005)CODE:1234 COS:05