Samsung DCS Manual

Also see for DCS: User guide Programming manual Quick reference guide User guide Technical manual

Contents

special features

Page 9PROGRAM KEYSUP & DOWN - Selects a station.KEYPAD - Used to enter number.HOLD - Press to clear entry.A - Does not have a function.B - Inserts a FLASH.C - Inserts a PAUSE.D - Changes the dialling type from pulse to tone.E - Hides and displays digits.F - Toggles program between Station speed dial numbers and namesOpen customer programming and follow the instructions below.ACTION DISPLAY1. Press TRSF 105Display shows[205] SPEED DIAL00 :2. Dial the station number (eg. 205) ORpress UP or DOWN keys to select the[205] SPEED DIAL00 :station and press the RIGHT soft key tomove the cursor OR press the LEFTsoft key to go to step 43. If the selected station has no speed dialbins, this display will be shown and a new[205] SPEED DIALSPDBLK NOT EXISTstation may be selected4. Dial the location number (eg, 05) ORpress UP or DOWN to select a location[205] SPEED DIAL05 : 0-4264100_and press the RIGHT soft key to movethe cursor OR press the LEFT soft key toreturn to step 25. Enter the line access code (eg. 0)followed by the number to be stored(eg. 4264100) OR press the RIGHT softkey to return to step 2 OR press theLeft soft key to return to step 3 OR pressHOLD to clear an entry (if you make anerror, use the DOWN key to step back)6. Press the F key to access programSystem Speed Dial Names OR pressTRSF to store and exit programming ORpress SPEAKER to save and advanceto the next program