Samsung DCS Manual

Also see for DCS: User guide Programming manual Quick reference guide User guide Technical manual

Contents

special features

Page 133.14 MANAGING KEY ASSIGNMENTSYou can view station key assignments and add extenders to some of the programmable keys for easyone-touch operation of frequently-used features. An extender is a number that makes an otherwisegeneral soft key very specific. Adding the digit 4 to a PAGE key defines this key for paging zone four.Adding 225 to a directed pick-up key defines this key as pick-up for extension 225 only. The soft keymust already be assigned by the installing technician. Adding extenders allows one- touch operation forthat feature.Use this program to assign extenders to the following soft keys:KEY EXTENDERBOSS Boss and Secretary (1 - 4)DIR PERS(1), SYS(2) or STN(3)DP Direct Pick-up (station or group no.)DS Direct Station Select (station or group no.)FWD Call Forward (0 - 5)GPIK Group Pick-Up (01 - 20)IG In/Out of Group (501- 519/529)MMPG Meet Me Page (0 - 9, *)PAGE Page (0 - 9, *)PMSG Programmed Message (01 - 20)SP UCD Supervise (UCD group no.)SPD Speed Dial (00 - 09, 500 - 999)PROGRAM KEYSUP & DOWN - Select the extension number.KEYPAD - Used to enter extender codes.HOLD - Used to clear the displayed data.Open customer programming and follow the instructions below.ACTION DISPLAY1. Press TRSF 107Display shows[201] KEY EXTEND01 : CALL12. Dial the station number (eg. 205) ORpress UP or DOWN to select the station[205] KEY EXTEND01 : CALL1and press the RIGHT soft key to move3. Enter the key number (e.g. 18) OR useUP or DOWN to scroll through the keys[205] KEY EXTEND18 : DS -> DS_and use the RIGHT soft key to move thecursor OR press the key to beprogrammed4. Dial the extender according to the listabove OR use UP or DOWN to scroll[205] KEY EXTEND18 : DS -> DS207through the keys and press the LEFT softkey to return to step 3 OR the RIGHT softkey to return to step 25. Press TRSF to store and exitprogramming OR press SPEAKER tostore and advance to the next program