Samsung DCS Manual

Also see for DCS: User guide Programming manual Quick reference guide User guide Technical manual

Contents

special features

Page 27ACTION DISPLAY1. Press TRSF 119 [201] CLIP DISPLAYDisplay shows NUMBER FIRST2. Display shows first station current display [201] CLIP DISPLAYmode enter Station number OR NUMBER FIRSTPress UP or DOWN to scroll through andpress the RIGHT soft key to select astation OR [ALL] CLIP DISPLAYpress ANS/RLS to select ALL stations ?3. Dial display option 0,1 or 2 OR press UP [201] CLIP DISPLAYor DOWN to select option and press the NUMBER FIRSTRIGHT or LEFT soft key to return to step24. Press TRSF to store and exit ORpress SPEAKER to store and advance tonext program3.29 PROGRAMMING FEATURE PASSCODESAllows the System Administrator to change the passcodes for several features. These features are thefollowing: DAY/NIGHT, DISA ALARM, ALARM CLR and AA RECORD.NOTE: The passcode is four digits long. Each digit can be 0-9. The current (old) passcode is notrequired for this program.PROGRAM KEYSKEYPAD Used to enter passcodesSPEAKER Save data and advance to next programACTION DISPLAY1. Press TRSF 202 CHANGE PASSCODEDisplay shows DAY/NIGHT : 00002. Press UP or DOWN key to make selection CHANGE PASSCODEPress RIGHT soft key to move cursor to ALARM CLR : 8765passcode entry3. Enter new passcode via digits from CHANGE PASSCODEdial key pad ALARM CLR : 9999ORPress RIGHT soft key to return to step 2Continue to change other passcodes4. Press TRSF to store and exit ORpress SPEAKER to store and advance tonext program