Samsung DVM PLUS III Technical Data Book

Also see for DVM PLUS III: Technical data book Installation manual

Contents

Control SystemsV-6022 Centralized control systemMain:0RMC:3Main:1RMC:4Main:2RMC:52-2. Centralized controller (MCM-A202A)8) Option switch K3 – Tracking mode settingDMSS-NET miniFunction controllerS-NET II PlusÔ Interface with DMS and S-NET mini – Set K4 to the OFF positionDMSS-NET miniCentralized controller( K4=OFF)DMS, S-NET minioperationCentralized controlleroperationGroup modeK3=OFFGroup modeControl/monitoring byRMC 3,4,5• On/Off control by RMC 3,4,5• Indoor unit LED display• All ON LED displayGroup modeK3=ONRoom modeControl/monitoring byRMC 3,4,5• Indoor unit control not allowed• Indoor unit LED OFF• All ON LED displayRoom modeK3=OFFGroup modeControl/monitoring byMain 0,1,2• On/Off control by RMC 3,4,5• Indoor unit LED display• All ON LED displayRoom modeK3=ONRoom modeControl/monitoring byMain 0,1,2• Indoor unit control not allowed• Indoor unit LED OFF• All ON LED displayÔ Interface with S-NET II Plus – Set K4 to the ON positionS-NET II Plus Centralized controller( K4=ON)S-NET II PlusoperationCentralized controlleroperationGroup mode K3=OFFGroup modeControl/monitoring byRMC 3,4,5• On/Off control by RMC 3,4,5• Indoor unit LED display• All ON LED displayGroup mode K3=ONRoom modeControl/monitoring byRMC 3,4,5• Tracking mode setting error• LED 4,5,6,7 ➔ Rotating displayRoom mode K3=OFFGroup modeControl/monitoring byMain 0,1,2• Tracking mode setting error• LED 0,1,2,3 ➔ Rotating displayRoom mode K3=ONRoom modeControl/monitoring byMain 0,1,2• Indoor unit control not allowed• Indoor unit LED OFF• All ON LED displayÔ Interface with function controller – Set K4 to the ON positionFunction controller Centralized controller( K4=ON)Function controlleroperationCentralized controlleroperationGroup mode K3=Not used Control/monitoring byRMC 3,4,5• On/Off control by RMC 3,4,5• Indoor unit LED display• All ON LED displayGroup mode – Indoor unit control/monitoring with the RMC addressRoom mode - Indoor unit control/monitoring with the Main address❈ Function controller controls indoor units based on their RMC address.Room mode is not supported for interface with the function controller.❈ S-NET II Plus does not support MIM-B13A interface.05-2_control systems(046~081) 3/6/08 14:02 Page 60