Samsung DVM PLUS III Technical Data Book

Also see for DVM PLUS III: Technical data book Installation manual

Contents

V-113CONTROL SYSTEMS2) Function(1) S-NET3 function descriptionView the management structure Control and monitor the indoor units (max. 4,096 units).View the installation structure Check and refer the state of various devices such as indoor/outdoorunits, centralized controller, and I/M.Indoor unit/ERV control Set the operation mode, temperature, fan speed, and fanControl & Monitoring direction of indoor unit/ERV.Indoor unit/ERV monitoring Monitor the status of indoor unit/ERV.View outdoor unit Check the outdoor unit’s cycle data and the cycle data of thelinked indoor units.View DMS Check the status data of the control unit linked to DMS.Create new schedule Set new schedule.View schedule Check the schedule of the selected indoor unit.Start/Stop schedule Start/Stop schedule application.Schedule Store/Call schedule Store/Call a prepared schedule.View daily schedule Confirm each schedule by date.Set common exception date Set the date which schedule operation is not applied on.Usage time and power Check the usage time and power for total, group, and individualindoor units.Power consumption report For preparing the report on the power consumption by each indoorunit for the period set.Usage time and powerPower distribution management Edit an indoor unit’s power management structuregroup editionSet the electricity rate section Set up to 3 sections for electricity billing management.Indoor unit status Check the status of indoor unit operation / temperature settingper period.Usage time and power Check the usage time and power for total, group, and individualStatistics and analysis indoor units.Indoor unit usage The usage ratio of all indoor units for a specific period.Set environment Set the environment related to S-NET3(password, language, temperature unit).Set DMS Set the DMS to connect with S-NET3.System management Refer event log Refer the warning, error, data of indoor units.Renew installed device information Modify S-NET3 data if installation data has been changed.DMS backup/restore Backup the data of DMS connected to S-NET3.S-NET3 backup/restore Backup the data of S-NET3.05-3_control systems(082~141) 3/6/08 14:04 Page 113