Samsung ET-WV531 User Manual

Also see for Connect Home Pro ET-WV531: User manual User manual

S AMSUNG WIRELESS ROUTER U SER M ANUAL P AGE 25Internet Connection Type: L2TP (Username / Password)Choose L2TP (Layer 2 Tunneling Protocol) if your ISP uses a L2TP connection. Your ISP will provide you with a usernameand password. This option is typically used for DSL services.The following parameters can be configured:Address Mode: Here the user can specify whether this Internet connection requires the use of a Dynamicor Static IP address. L2TP usual requires a Dynamic IP configuration.L2TP IP Address: Enter the L2TP IP address used here. This option is only available if Static IP is selected.L2TP Subnet Mask: Enter the L2TP Subnet Mask used here.L2TP Gateway IP Address: Enter the L2TP Gateway IP address used here.L2TP Server IP Address: Enter the L2TP Server IP address used here. This is normally the same a the PPTP Gate-way IP address.Username: Enter the L2TP username used here.Password: Enter the L2TP password used here.Verify Password: Re-enter the L2TP password used here.Reconnect Mode: Use the radio buttons to specify the reconnect mode. The user can specify a customschedule or specify the On Demand, or Manual option. To specify a custom sched-ule, use the drop-down menu to select one of the schedules that has been defined in theSchedules page. To create a new schedule, click the New Schedule button to open theSchedules page. Schedules will be discussed later.Maximum Idle Time: Enter a maximum idle time during which the Internet connection is maintained duringinactivity. To disable this feature, enable Auto-reconnect.Primary DNS Server: Enter the Primary DNS IP address used here.Secondary DNS Server: Enter the Secondary DNS IP address used here. This field is normally optional. Only oneDNS address is required for a functional Internet connection, but using a second DNSaddress provides more stability.DRAFT, not Final