Samsung ET-WV531 User Manual

Also see for Connect Home Pro ET-WV531: User manual User manual

S AMSUNG WIRELESS ROUTER U SER M ANUAL P AGE 34The next section will allow the user to configure all the parameters regarding the 5GHz frequency band.The following parameters can be configured:Wireless Band: Displays the wireless band being configured. In this option we find that the followingparameters will be regarding the 5GHz band.Enable Wireless: Check the box to enable the wireless function. If you do not want to use wireless, uncheckthe box to disable all the wireless functions. Select the time frame that you would like yourwireless network enabled. The schedule may be set to Always. Any schedule you createwill be available in the drop-down menu. Click New Schedule to create a new schedule.Wireless Network Name: The Service Set Identifier (SSID) is the name of your wireless network. Create a name us-ing up to 32 characters. The SSID is case-sensitive.Enable Auto ChannelSelection:The auto channel selection setting can be selected to allow this device to choose thechannel with the least amount of interference.Wireless Channel: By default the channel is set to 36. The Channel can be changed to fit the channel settingfor an existing wireless network or to customize the wireless network. If you enable AutoChannel Selection, this option will be greyed out.Transmission Rate: Select the transmit rate. It is strongly suggested to select Best (Automatic) for best per-formance.Wireless Mode: Here the user can manually select the preferred frequency band to use for this wirelessnetwork.Band Width: When using the 802.11n frequency band, the user have an option to choose between a20MHz or 20/40MHz bandwidth.WMM Enable: WMM (Wi-Fi Multimedia) is QoS for your wireless network. Check this box to improvethe quality of video and voice applications for your wireless clients. This feature is notavailable in 802.11n configurations.Enabled Hidden Wireless: Check this box if you do not want the SSID of your wireless network to be broadcasted.If the SSID is hidden, the SSID will not be seen by Site Survey utilities, so your wirelessclients will have to know the SSID of your router in order to connect to it.By default the wireless security of this router will be disabled. In this next option the user can enabled or disable wirelesssecurity for the frequency band 5GHz. These settings are identical to what we’ve discussed for the 2.4GHz security earlier.Click on the Save Settings button to accept the changes made.Click on the Don’t Save Settings button to discard the changes made.DRAFT, not Final