English 1701 Getting Started11 TONE CONTROL BUTTON Used to set the bass, treble level and tone to on/off.12 SMART HUB BUTTON Display the Smart Hub service screen.13 S.DIRECT BUTTONUsed to select the S.DIRECT mode.(Output the original signal as it is without applying the sound field effect or anyother sound effect.)14 vTuner BUTTON Used to select the vTuner.15 AV SYNC BUTTON Used to set the Audio Delay.16 TUNING MODE BUTTON Used to select the Manual or Preset mode for FM radio.17 SELECT BUTTON Used to change the radio frequency.18 MEMORY BUTTON Used to set a preset radio frequency.19 MENU BUTTON Display the home menu screen.20 UP(,), DOWN(.), LEFT(<),RIGHT(>) BUTTONS Used to move the cursor up, down, left or right.21 RETURN BUTTON Return to the previous menu.22 AUDIO ASSIGN BUTTON Toggles to select an input mode for the selected source.23 AUDIO EFFECT BUTTON Toggles to select a surround sound mode.24 3D SOUND BUTTON Used to set the 3D sound.25 ASC MIC JACK Used to connect the ASC Microphone for setting up MRC (Musical Room Calibration).26 USB PORTYou can connect a USB memory flash stick here and use it as storage when the product isconnected to BD-LIVE. You can also use the USB Host for software upgrades and MP3/JPEG/DivX/MKV/MP4 playback.27 AUX 1 IN JACKS Auxiliary AV input terminals used to connect a camcorder, portable DVD playeror gaming device.28 PHONES JACK Used to connect a set of headphones or earphones.NOTEYou must use a USB memory flash stick to perform a software upgrade using the USB Host jack.When the product displays the Blu-ray disc menu, you cannot start the movie by pressing the PLAY button on theproduct or the remote. To play the movie, you must select Play Movie or Start in the disc menu, and then press theENTER button.✎HW-D7000_XAC_0516.indd 17HW-D7000_XAC_0516.indd 17 2011-05-16 3:45:182011-05-16 3:45:18
