42 EnglishSetupMusical Room CalibrationBy setting the Musical Room Calibration (MRC)function just once when you relocate or install theproduct, you can have the product automaticallyrecognize the distance between speakers, levelsbetween channels, and frequency characteristicsto create a 7.1-channel sound field optimized foryour environment.ASC MIC VIDEO AUDIO PHONESAUX 1 INTONECONTROLTUNINGMODEAUDIOASSIGNAUDIOEFFECTSmart HUBvTunerAV SYNCSELECTMEMORYMENURETURN3D SOUNDASC MICVIDEOAUDIOPHONESAUX 1 INASCmicrophoneMusical Room Calibration ModeYou will hear either the Musical Room Calibrationmode or the User Speaker Settings.Off: You will hear sound in the Speaker Settingvalue.On: You will hear sound in the Musical RoomCalibration mode.MeasurementPlug the ASC microphone into the ASC IN jack.Place the ASC microphone at the listening position.Musical Room Calibration will be automaticallyset up in the following sequence:Front L Center Front R SurroundR Surround Back R Surround BackL Surround L SubwooferPress the RETURN button to cancel theMusical Room Calibration Setting.••1.2.••NOTERunning the Musical Room Calibrationfunction takes about 3 minutes.Make sure there is no disc in the product whenyou run the Musical Room Calibration function.If the ASC microphone is disconnected during theMusical Room Calibration setup, the setup will becanceled.If the product is connected to external devices orother components (such as an iPod, AUX, D.IN),the Musical Room Calibration Setup may not workproperly.Noise may result in incorrect measurements.Ensure the room is quiet when you run theMusical Room Calibration.Place the microphone in the main listeningposition.Make sure there are no objects between thespeakers and microphone.Note that the test tones of the speakers may beloud.Do not place the microphone behind furniture ortoo close to the wall. Otherwise, it can produce anincorrect test result.✎HW-D7000_XAC_0516.indd 42HW-D7000_XAC_0516.indd 42 2011-05-16 3:46:252011-05-16 3:46:25
