Samsung ML-3470 Series User Manual

Also see for ML-3470: User guide

Contents

2.3 < System setup>Paper menuUse the Paper menu to define all settings relating to print material inputand output, as well as the specific print material you are using with yourprinter.Graphic menuUse the Graphic menu to change settings affecting the quality of theprinted characters and images.Item ExplanationCopies Set the default number of copies by selecting anynumber from 1 to 999.Paper Size Select the paper size currently loaded in the tray.Paper Type Select the paper type currently loaded in the tray.PaperSourceUsing this item, you can set which tray you want touse.• If you select Auto, the printer can automaticallydetermine the source.• Select MP Tray or Manual Tray to use the multi-purpose tray. If you select Manual Tray, youneed to press OK each time you print a page.• Tray 2 is available only when an optional tray 2 isinstalled.TrayChainingWhen you select any other value except Auto fromPaper Source and the selected tray is empty, theprinter automatically prints from other trays.If this menu item is set to Off, the printer does notwork until you insert paper into the specified tray.Item ExplanationResolution Specify the number of dots printed per inch (dpi).The higher the setting, the sharper printedcharacters and graphics.• If your print jobs are mostly text, select 600dpi-Normal for the highest quality printing.• Select 1200dpi-Best when your job containsbitmapped images, such as scanned photos orsome graphics, that will benefit from enhancedline screening.Darkness You can lighten or darken the print on the page bychanging the toner density setting. The Normalsetting usually produces the best result. Use theLight toner density setting to save toner.ImageEnhanceThis item enhances the print quality.• Normal: Doesn’t enhance the quality.• Text Enhance: Enhances letters and simplefigures.System Setup menuUse the System Setup menu to configure a variety of printer features.Item ExplanationLanguage This setting determines the language of the textthat appears on the control panel display andinformation printing.Power Save When the printer does not receive data for anextended period of time, power consumption isautomatically lowered. You can set how long theprinter waits before going to power save mode.AutoContinueThis item determines whether or not the printercontinues printing when it detects the paperunmatched to your paper setting.• Off: If a paper mismatch occurs, the messagewill remain on the display and the printer willwait until you insert the correct paper.• On: If a paper mismatch occurs, an errormessage will display. The printer will wait for 20seconds, then automatically clear the messageand continue printing.Altitude Adj. You can optimize print quality according to youraltitude.Auto CR This item allows you to append the requiredcarriage return to each line feed.Refer to the following samples:Job Timeout You can set the length of time the printer waitsbefore printing the last page of a print job thatdoes not end with a command to print the page.When a print time-out occurs, the printer prints thepage in the print buffer.LF LF+CRAABBCCAABBCC