10.4 Selecting the authentication typeAuthentication is a process of identifying the legitimacy of an user toaccess a network. You can select whether or not authentication is used.1 Press Menu until Network appears on the bottom line of thedisplay and press OK.2 Press the scroll buttons until Wireless appears and press OK.3 Press the scroll buttons until WLAN Security appears and pressOK.4 Press the scroll buttons until Static WEP appears and press OK.5 Press the scroll buttons until Authentication appears and pressOK.6 Press the scroll buttons to select the type you want.• Open System: Authentication is not used.• Shared Key: Authentication is used.7 Press OK to save your selection.8 Press Stop to return to Standby mode.Setting EncryptionIf your network uses WEP encryption keys, you can must select theappropriate encryption type and configure encryption keys. You canconfigure up to four keys. The active key must match the key value andkey position (for example, Key 1) configured on other wireless devices inthe network.1 Press Menu until Network appears on the bottom line of thedisplay and press OK.2 Press the scroll buttons until Wireless appears and press OK.3 Press the scroll buttons until WLAN Security appears and pressOK.4 Press the scroll buttons until Static WEP appears and press OK.5 Press the scroll buttons until Encryption appears and press OK.NoteIf you have set the authentication type to Open System, theEncryption menu does not display.6 Set each encryption option and press OK.• Encrypt. Type: Select an encryption type:• Key Type: Select the key type of your network.• Using Key: Select the key to be used in your network.• Edit Key: Enter the key number for the selected key position. Thenumbers you can enter as follows:Hexadecimal Alphanumeric64-bit WEP 10 digits 5 characters7 When you have finished, press Stop to return to Standby mode.Restoring default values for wireless networkingIf the problem occurrs when you use or set up the wireless networkvalues, take following stops to restore factory default values. Generally,factory values of wireless networking are optimized for your printer.1 Press Menu until Network appears on the bottom line of thedisplay and press OK.2 Press the scroll buttons until Wireless appears and press OK.3 Press the scroll buttons until WLAN Default appears and pressOK.4 When Restore appears on the bottom line of the display, pressOK. The printer starts restoring the default values.128-bit WEP 26 digits 13 charactersHexadecimal Alphanumeric
