5.8 < Loading print media>Selecting an output locationThe printer has two output locations; the rear cover (face up) and theoutput tray (face down).The printer sends output to the output tray by default. To use the outputtray, make sure that the rear cover is closed.Notes• If paper coming out of the output tray has problems, such asexcessive curl, try printing to the rear cover.• To avoid paper jams, do not open or close the rear cover whilethe printer is printing.Printing to the output tray (Face down)The output tray collects paper face down, in the order in which the sheetswere printed. The tray should be used for most print jobs.11 rear cover2 output tray2Printing to the rear cover (Face up)Using the rear cover, paper comes out of the printer face up.Printing from the multi-purpose tray to the rear cover provides a straightpaper path. Using the rear cover might improve the output quality withspecial print media.To use the rear cover, open it by pulling down.CautionThe fuser area inside the rear cover of your printer becomesvery hot when in use. Take care when you access this area.
