Samsung ML-3470 User Manual

Also see for ML-3470: User guide

Contents

10.2 < Installing accessories>6 Push the DIMM straight into the DIMM slot until it snaps into place.Make sure the latches fit over the notches located on either side ofthe DIMM.7 Replace the control board cover.8 Reconnect the power cord and printer cable, and turn the printeron.Setting the memory in the PostScript printerpropertiesAfter installing the memory DIMM, you need to select it in the printerproperties of the PostScript printer driver so that you can use it.1 Make sure that the PostScript printer driver is installed in yourcomputer. To installing the PostScript printer driver, you need toselect Custom and put a check mark on the PostScript printerdriver. See the Software Section.2 Click the Windows Start menu.3 For Windows 2000, select Settings and then Printers.For Windows XP/2003, select Printers and Faxes.For Windows Vista, select Control Panel -> Hardware and Sound-> Printers.4 Select the Samsung ML-3470 Series printer.5 Click the right mouse button on the printer icon and selectProperties.6 For Windows 2000/XP/2003/Vista, select Device Settings tab.7 Select the amount of memory you installed from Printer Memory inthe Installable Option section.8 Click OK.Installing a wireless network interface cardML-3471ND is equipped with a network interface which allows you touse your printer on a network. You can also purchase a wireless networkinterface card to enable the use of the printer in wireless networkenvironmentsFor order information, see page 7.1.Review the precautions on page 10.1 and then follow this procedure toinstall the wireless network interface card in your printer.1 Turn the printer power off and unplug all cables from the printer.2 Grasp the control board cover and slide toward you to open it.3 Align the connector on the wireless network interface card with theconnector on the control board. Push the card firmly into theconnector on the control board until it is completely and securely inplace.1 control board cover11 connector2 wireless networkinterface card12