9.7 < Troubleshooting>LSU Motor ErrorCycle PowerA problem hasoccurred in the LSU(Laser ScanningUnit).Unplug the powercord and plug it backinches. If theproblem persists,please call forservice.Main MotorLockedThere is a problemin the main motor.Open and then closethe front cover.Open Heat ErrorCycle PowerThere is a problemin the fuser unit.Unplug the powercord and plug it backin. If the problempersists, please callfor service.Over Heat ErrorCycle PowerThere is a problemin the fuser unit.Unplug the powercord and plug it backin. If the problempersists, please callfor service.Paper Jam 0Open/Close DoorPaper has jammedin the feeding areaof the tray.Clear the jam. Seepage 9.1 andpage 9.1.Paper Jam 1Open/Close DoorPaper has jammedin the fuser area.Clear the jam. Seepage 9.3.Paper Jam 2Check InsidePaper has jammedin the paper exitarea.Clear the jam. Seepage 9.3.Printing...The printer isprinting jobs usingthe displayedlanguage.Complete yourprinting.Ready The printer is on-lineand ready to printer. Use your printer.Self DiagnosticLSUThe LSU(LaserScanning Unit) inyour printer ischecking someproblems detected.Please wait a fewminutes.Self DiagnosticTemperatureThe engine in yourprinter is checkingsome problemsdetected.Please wait a fewminutes.Sleeping... The printer is onpower save mode.When data isreceived, it switchesto on-lineautomatically.Message Meaning Suggested solutionsTray 1Paper EmptyThere is no paper inthe tray 1.Load paper in thetray 1. See page 5.5.Tray 2Paper EmptyThere is no paper inthe optional tray 2.Load paper in theoptional tray 2. Seepage 5.5.Message Meaning Suggested solutions
