Safety information 121. Introduction 6Installation / MovingWarningCautionDo not block or push objects into the ventilationopening.This could result in elevated component temperatureswhich can cause damage or fire.Be care when replacing paper or removing jammedpaper.New paper has sharp edges and can cause painful cuts.When printing large quantities, the bottom part of thepaper output area may get hot. Do not allow children totouch.Burns can occur.When removing jammed paper, do not use tweezers orsharp metal objects.It can damage the machine.Do not allow too many papers to stack up in the paperoutput tray.It can damage the machine.This machine's power reception device is the power cord.To switch off the power supply, remove the power cordfrom the electrical outlet.Do not place the machine in an area with dust, humidity,or water leaks.This could result in electric shock or fire.Before moving the machine, turn the power off anddisconnect all cords.Then lift the machine:• If the machine weighs under 20 kg (44.09 lbs), lift with1 person.• If the machine weighs 20 kg (44.09 lbs) - 40kg (88.18lbs), lift with 2 people.• If the machine weighs more than 40 kg (88.18 lbs), liftwith 4 or more people.The machine could fall, causing injury or machinedamage.
