IPv6 configuration 302. Using a network-connected machineIf the machine does not work in the network environment,activate IPv6. 12Setting IPv6 addressesThe machine supports the following IPv6 addresses for networkprinting and managements.• Link-local Address: Self-configured local IPv6 address (Addressstarts with FE80).• Stateless Address: Automatically configured IPv6 address by anetwork router.• Stateful Address: IPv6 address configured by a DHCPv6 server.• Manual Address: Manually configured IPv6 address by a user.DHCPv6 address configuration (Stateful)If you have a DHCPv6 server on your network, you can set one of thefollowing options for default dynamic host configuration.1 Press the (Menu) button on the control panel.2 Press Network > TCP/IP (IPv6) > DHCPv6 Config.3 Press OK to select the required value you want.• DHCPv6 Addr.: Always use DHCPv6 regardless of routerrequest.• DHCPv6 Off: Never use DHCPv6 regardless of routerrequest.• Router: Use DHCPv6 only when requested by a router.For models that have the touch screen on the control panel,follow the next procedure:a Press Setup from the Main screen.b Press Network > Next > TCP/IP (IPv6)> DHCPv6 Config.c Select the required value you want.d Press the home icon ( ) to return to the Standby mode.Manual address configuration1 Start a web browser, such as Internet Explorer, that supportsIPv6 addressing as a URL.2 When the SyncThru™ Web Service window opens, move themouse cursor over the Settings of the top menu bar and thenclick Network Settings.3 Click TCP/IPv6 on the left pane of the website.
