Regulatory information 1225. AppendixIf you cut off the moulded plug, get rid of it straight away.You cannot rewire the plug and you may receive an electricshock if you plug it into a socket.Important warning:If the wires in the mains lead do not match the colors marked in yourplug, do the following:You must connect the green and yellow wire to the pin marked bythe letter “E” or by the safety ‘Earth symbol’ or colored green andyellow or green.You must connect the blue wire to the pin which is marked with theletter “N” or colored black.You must connect the brown wire to the pin which is marked withthe letter “L” or colored red.You must have a 13 amp fuse in the plug, adaptor, or at thedistribution board.19Declaration of conformity (Europeancountries)Approvals and CertificationsJanuary 1, 1995: Council Directive 2006/95/EC Approximation ofthe laws of the member states related to low voltage equipment.January 1, 1996: Council Directive 2004/108/EC, approximation ofthe laws of the Member States related to electromagneticcompatibility.You must earth this machine.The wires in the mains lead have the following color code:• Green and Yellow: Earth• Blue: Neutral• Brown: LiveHereby, Samsung Electronics, declares that this [ML-451x Series / ML-501x Series ] is in compliance with theessential requirements and other relevant provisions ofLow Voltage Directive (2006/95/EC), EMC Directive (2004/108/EC)The declaration of conformity may be consulted atwww.samsung.com/printer, go to Support > Downloadcenter and enter your printer (MFP) name to browse theEuDoC.
