Wireless network setup 372. Using a network-connected machineDisconnecting from a networkTo disconnect the wireless network connection, press the (WPS)button or (Cancel or Stop/Clear) button on the control panel formore than two seconds.• When the Wi-Fi network is in idle mode: The machine isimmediately disconnected from the wireless network.• When the Wi-Fi network is being used: While the machinewaits until the current job is finished, the light blinks fast on theWPS LED. Then, the wireless network connection is automaticallydisconnected. 17Using the WLANSome models may not support this feature.Before starting, you will need to know the network name (SSID) ofyour wireless network and the network key if it is encrypted. Thisinformation was set when the access point (or wireless router) wasinstalled. If you do not know about your wireless environment,please ask the person who set up your network.After completing the wireless network connection, you needto install a machine driver to print from an application (see"Installing driver over the network" on page 17).1 Press the (Menu) button on the control panel.2 Press Network > Wireless > WLAN Settings.3 Press the OK to select the setup method you want.• Wizard (recommended): In this mode the setup isautomatic. Machine will display a list of available networkto choose. After a network is chosen then printer willprompt for the corresponding security Key.• Custom: In this mode users can give their own SSID or editSSID, choose the security manually and apply the settings.• For models that have the touch screen on the controlpanel, follow the next procedure:a Press Setup from the Main screen.b Press Network > Next > Wireless > WLAN Setting.c Select the setup method you want.• If your machine is connected to the network, you can setthe WLAN via SyncThru™ Web Service.
