Samsung MSYS SF-6900 User Manual

Also see for MSYS SF-6900: Product guide

Contents

1.23Setting up your machine1 Getting StartedSetting the date and timeThe current date and time are shown in the display window when themachine is on and ready for use (standby mode). The date and time areprinted on all faxes you send.1. Press Menu, then press Date & Time on the one-touch keypad.The display shows the currently set date and time.2. Using the number keypad, enter the current date in DDMMYYYY format.If you make a mistake, use the ➛ or ❿ buttons to move the cursor to thedigit you wish to change.05-03-199908:36 (PM)After entering the date the flashing cursor will move into the first digit ofthe time.3. Using the number keypad, enter the current time. You can choose 12 or24 hour format. Refer to the previous section, for the details see page 2.46clock mode.Note : AM or PM is selected by pressing the" or❷ buttons.4. Press Start/Enter when the date and time in the display is correct.The display shows the date and time you have set, then returns tostandby mode.Note : If you enter an invalid number, the machine beeps and will not proceed tothe next step. If this happens, just reenter the correct number.Adjusting speaker volume1. Press OHD1)/V.Req. to adjust the speaker volume. If you cannot hear adial tone, check the phone line connection.2. Press " or ❷ repeatedly until you find the desired loudness. The displayshows the current volume level.3. After choosing the desired volume level, press OHD1)/V.Req..Note : 1) OHD : On Hook Dial