Samsung MSYS SF-6900 User Manual

Also see for MSYS SF-6900: Product guide

Contents

2.11Sending a fax2 OperationVoice requestIf you’re sending or receiving a document and need to speak to the otherperson at the same phone call, use voice request to alert the person at theremote site. You can also respond to a voice request made by the person atthe remote end.Note: As the machine is not equipped with handset, separate extension phoneshould be connected to TEL jack before using the voice request function.Sending a voice request1. Press OHD/V.Req. while a document is being sent or received. Voicerequest signal is stored and then sent to the remote fax machine after thedocument has been sent or received.2. When the phone rings, pick up the handset and answer it.You can cancel a voice request by pressing OHD/V.Req. again while youare sending or receiving a document.Answering a voice requestWhen the phone rings after sending or receiving a fax, pick up the handsetthen press Stop.If you don’t answer the voice request, the machine prints out the numberthat made the voice request, and the time and date the request was made.Automatic redialWhen you send a fax, if the number you have dialed is busy or there is noanswer, the machine hangs up, waits for the specified retry term and redialsthe number. If after the specified number of retry attempts (retry count), themachine fails to connect, the machine returns to Standby mode.While the machine is redialing, the display shows ‘RETRY REDIAL ?’. Ifyou want to redial the number immediately, press Start/Enter. To stopredialing, press Stop.You can select the number of retries and the retry term between each redialattempt.