Samsung NP-R40 User Manual

Also see for NP-R40: Manual

Contents

124 Users Manual• Using an AT commandAs an initialization command, use the command, ATX3.Otherwise, enter the ATX3 command manually before making a call.It can correct this problem by skipping the dial tone check step.• Configuring the Modem through the Control Panel1. Click Start > Control Panel > Network and Internet Connections.2. Under See Also, click Phone and Modem Options.3. In the Modems tab, select the installed modem, and click Properties.4. In the Modem tab of the Modem Properties window, clear the 'Wait for dialtone before dialing' check box.5. When the configuration is completed, click OK.Q3 How do I use my modem when dialing from overseas?A1 Check that the modem is correctly configured according to the current country. Be-cause the values for communication may differ according to the country, you maynot be able to connect via the modem due to an incorrect modem configuration.1. Click Start > Control Panel > Network and Internet Connections.2. Under See Also, click Phone and Modem Options.3. In the Dialing Rules tab, click Edit.4. In the General tab in the Edit Location window, select the current country fromthe Country/region radio box, specify the Area code, and click OK.A2 Because the shape of the telephone plug may differ according to the country, youhave to purchase and use the appropriate telephone plug for that particular country.Q4 How do I receive a fax while the system is in power saving mode (Rest mode) ?A To receive a fax in Standby Mode, you have to set it up as follows.1. The automatic fax reception function of the fax program needs to be activated.(For more information, refer to the corresponding fax program manual.)2. Click Start > Control Panel > Network and Internet Connections.3. Under See Also, click Phone and Modem Options.4. In the Modems tab, select the installed modem, and click Properties.5. In the Power Management tab of the Modem Properties window, select the“With this device, exit the computer from stand-by mode” item and then click OK.The above setting enables the modem to turn on the system and receive a faxwhen in power saving mode.