Samsung OFFICESERV 100 Series System Administration & Special Features Manual

Also see for OFFICESERV 500 Series: Service manual System administration guide Quick setup guide Quick setup guide Quick setup guide

Contents

28PROGRAM KEYSUP & DOWN - Select the extension number.KEYPAD - Used to enter extender codes.HOLD - Used to clear the displayed data.Open customer programming and follow the instructions below.ACTION DISPLAY1. Press TRSF and then dial 107 [201] KEY EXTENDDisplay shows the first station 01:CALL12. Dial the station number (e.g., 205) OR use [205] KEY EXTENDUP or DOWN to scroll through the station 01:CALL1numbers and press the right soft key tomove the cursor3. Enter the key number (e.g., 18) OR use [205] KEY EXTENDUP and DOWN to scroll through the keys 18:DSand use the right soft key to move thecursor OR press the key to be programmed4. Dial the extender according to the listabove and the system will display yourselectionIf there are no more entries, pressthe left soft key to return to step 25. Press TRSF to store and exit programming [205] KEY EXTENDOR press SPK to store and advance to the 18:DS207next program29PROGRAMMING ACCOUNT CODESThis program is used to add or change account code entries.PROGRAM KEYSKEYPAD - Used to enter the account code (allowable digits 0–9).UP & DOWN - Used to select entry number.FLASH & TRSF - Used to view and change only the used entries.SPK/RLS - Used to clear data.Open customer programming and follow the instructions below.ACTION DISPLAY1. Press TRSF and then dial 708 ACCOUNT CODEDisplay shows (001)2. Dial the account code entry (e.g., 005) ACCOUNT CODEOR press UP or DOWN to select the (005)entry number and press the right softkey to move the cursor3. Enter the account code via the dial pad, ACCOUNT CODEe.g., 1234 (maximum of 12 digits) and (005)123456789012press the right soft key to move thecursor back to step 24. Press TRSF to store and exit pro-gramming OR press SPK to store andadvance to the next program