OfficeServ 7400 General Description© Samsung Business Communications 2-52.3 Modules by FunctionTable 2.3 shows the function of each available module.Table 2.3 Modules by FunctionFunctions ModulesMain Control Basic Chassis: MP40 (Option Module: Modem)Any Chassis: LP40 (Option Module: SCM, RCM2, MFM, CRM and MIS)Voice Trunk Line TEPRI, TEPRI2, 4BRI and 8TRKVoice Station 16DLI2, 8DLI, 16MWSLI and 8COMBOData 4DSL, LIM, PLIM, GPLIM, GSIM and GWIM (Option Module: GWIMS)Voice Application 4WLI, MGI (Option Module: MGI2D), MGI64Power, Fan PSU and Fan2.3.1 Control ModulesThis section describes the configuration and functions of the MP40 and LP40 control mod-ules.2.3.1.1 MP40 (Main Control Module)MP40 is the main control module for all functions of the OfficeServ 7400 and is mountedin slot 3 of the basic chassis. The MP40:y performs voice switching and signal processing;y controls subscribers’ station management functions;y performs system booting and data management functions;y recognizes/monitors/controls the modules mounted in the universal slot of the expan-sion chassis through IPC by connecting to the LP40 in the expansion chassis of the Of-ficeServ 7400, or the LCP in the expansion chassis of an OfficeServ 7200.The MP40 is connected to the LAN Interface Module (LIM) via the LAN Interface on thefront panel to drive various applications. The flexibility of the system is improved by ac-commodating the VoIP function, and the load on the system is balanced by using a controlmodule for each chassis. IPC between chassis uses the HDLC protocol to increase the reli-ability.