English - 9Connecting a Digital Audio System¦The rear panel jacks on your TV make it easy to connect a Digital Audio System (Home theater/Receiver) to your TV.ANT INHDMI INSERVICEHDMI/PC/DVI-DAUDIO INAV IN- AUDIO -R L VIDEODVI-D IN PC INDIGITALAUDIO OUT(OPTICAL)ANT INHDMI INSERVICEHDMI/PC/DVI-DAUDIO INAV IN- AUDIO -R L VIDEODVI-D IN PC INDigital Audio SystemTV Rear Panel1 Optical Cable (Not supplied)When a Digital Audio System is connected to theN DIGITAL AUDIO OUT (OPTICAL) jack:Decrease the volume of the TV and adjust the volume level with the system’s volume control.5.1CH audio is possible when the TV is connected to an external device supporting 5.1CH.NEach Digital Audio System has a different back panel configuration.NWhen the receiver (home theater) is set to On, you can hear sound output from the TV’s OpticalNjack. When the TV is displaying a DTV(air) signal, the TV will send out 5.1 channel sound to theHome theater receiver. When the source is a digital component such as a DVD / Blu-Ray player/ Satellite receiver (Set-Top Box) and is connected to the TV via HDMI, only 2 channel soundwill be heard from the Home Theater receiver. If you want to hear 5.1 channel audio, connectthe digital audio out jack on DVD / Blu-Ray player / Satellite receiver (Set-Top Box) directly to anAmplifier or Home Theater, not the TV.Connecting a PC¦Using the D-Sub CableANT INHDMI/PC/DVI-DAUDIO INDVI-D IN PC IN ANT INDVI-D IN PC INANT INHDMI INSERVICEHDMI/PC/DVI-DAUDIO INAV IN- AUDIO -R L VIDEODVI-D IN PC INDIGITALAUDIO OUT(OPTICAL)ANT INHDMI INSERVICE AV IN- AUDIO -R L VIDEODVI-D INDIGITALAUDIO OUT(OPTICAL)TV Rear PanelPC1 D-Sub Cable (Not supplied)When connecting a PC, match the color of the connection terminal to the cableN .2 Stereo Cable (Not supplied)