English - 15PICTURE CONTROLConfiguring the Picture Menu (TV / AV / Component / HDMI )¦Mode❑You can select the type of picture which best corresponds toyour viewing requirements.DynamicSelects the picture for increased definition in a bright room.StandardSelects the picture for the optimum display in a normalenvironment.MovieSelects the picture for viewing movies in a dark room.Backlight❑ / Contrast / Brightness / Sharpness / Color / TintYour television has several setting options that allow you to control the picture quality.Backlight● : Adjusts the brightness of LCD back light.Contrast● : Adjusts the contrast level of the picture.Brightness● : Adjusts the brightness level of the pictureSharpness● : Adjusts the edge definition of the picture.Color● : Adjusts color saturation of the picture.Tint● : Adjusts the color tint of the picture.When you make changes to “N Backlight”, “Contrast”, “Brightness”, “Sharpness” “Color”or “Tint(G/R)” the OSD will be adjusted accordingly.Settings can be adjusted and stored for each external device you have connected to an input ofNthe TV.The energy consumed during use can be significantly reduced if the level of Backlight is reduced,Nand that this will reduce the overall running cost.Picture Options❑In PC mode, you can only make changes to the “N ColorTone” and “Size” from among the items in “PictureOptions”.Color Tone → Cool / Normal / Warm1 / Warm2SizeOccasionally, you may want to change the size of the image onyour screen. Your TV comes with six screen size options, eachdesigned to work best with specific types of video input. Yoursatellite receiver may have its own set of screen sizes as well. In general, though, you should viewthe TV in 16:9 mode as much as possible.Alternately, you can press theO P.SIZE button on the remote control repeatedly to change thepicture size.16:9● : Sets the picture to 16:9 wide mode.Zoom1● : Magnifies the size of the picture on the screen.Zoom2● : Magnifies the size of the picture more than “Zoom1”.Wide Fit● : Enlarges the aspect ratio of the picture to fit the entire screen.4:3● : Sets the picture to 4:3 normal mode.Screen Fit: Use the function to see the full image without any cutoff when HDMI●(720p/1080i/1080p), Component (1080i/1080p) or DTV (1080i) signals are input.Mode : Standard ►Backlight : 8Contrast : 95Brightness : 45Sharpness : 50Color : 50Tint (G/R) : G50/R50PicturePicture OptionsColor Tone : Normal ►Size : 16:9Digital NR : AutoHDMI Black Level : NormalFilm Mode : OffU Move E Enter R Return