Samsung P2370HD - Full 1080p HDTV LCD Monitor User Manual

Also see for P2370HD - Full 1080p HDTV LCD Monitor: Manual User manual Quick start guide Quick setup guide Specifications

Contents

English - 30Setting Up Anynet¦ +Press theT TOOLS button to display the Tools menu. You canalso display Anynet+ menu by selecting Tools → Anynet+(HDMI-CEC).Setup❑Anynet + (HDMI-CEC) → Off / OnTo use the Anynet+ Function, Anynet+ (HDMI-CEC) must be setto On.When theN Anynet+ (HDMI-CEC) function is disabled, all theAnynet+ related operations are deactivated.Auto Turn Off → No / YesSetting an Anynet+ Device to turn Off Automatically when theTV is Turned OffThe active source on the TV remote must be set to TV toNuse the Anynet+ function.If you setN Auto Turn Off to yes, connected external devicesare also turned off when the TV is turned off. If an externaldevice is still recording, it may or may not turn off.Switching between Anynet¦ + Devices1. Press the TOOLS button. Press the E button to selectAnynet+ (HDMI-CEC).2. Press the ▲ or ▼ button to select Device List, then press theE button.AnynetN + devices connected to the TV are listed.If you cannot find a device you want, press the red button toNscan for devices.3. Press the ▲ or ▼ button to select a particular device and pressthe E button. It is switched to the selected device.Only when you setN Anynet+ (HDMI-CEC) to On in theApplication menu, the Device List menu appears.Switching to the selected devices may take up to 2 minutes. You cannot cancel the operationNduring the switching operation.The time required to scan for devices is determined by the number of connected devices.NWhen the device scan is complete, the number of devices found are not displayed.NAlthough the TV automatically searches the device list when the TV is turned on via the powerNbutton, devices connected to the TV when the TV is on or under some conditions are notautomatically displayed in the device list. Press the red button to search for the connecteddevice.If you have selected external input mode by pressing theN SOURCE button, you cannot use theAnynet+ function. Make sure to switch to an Anynet+ device by using the Device List.Anynet+ (HDMI-CEC) ►ApplicationDevice ListSetupU Move E Enter R ReturnAnynet+(HDMI-CEC) : OnAuto Turn Off : YesU Move E Enter R ReturnView TVDevice ListRecord : DVDRDVDR MenuDVDR OperationSetupU Move E Enter R Return