Samsung P2370HD - Full 1080p HDTV LCD Monitor User Manual

Also see for P2370HD - Full 1080p HDTV LCD Monitor: Manual User manual Quick start guide Quick setup guide Specifications

Contents

English - 6Connecting Cable TV¦To connect to a cable TV system, follow the instructions below.Cable without a Cable BoxPlug the incoming cable into the ANT IN terminal on the back ofthe TV.Because this TV is cable-ready, you do not need a cable boxNto view unscrambled cable channels.Connecting to a Cable Box that Descrambles All Channels1. Find the cable that is connected to the ANT OUT terminal onyour cable box.This terminal might be labeled ‘ANT OUT’, ‘VHF OUT’ orNsimply, ‘OUT’.2. Connect the other end of this cable to the ANT IN terminal onthe back of the TV.Connecting to a Cable Box that Descrambles Some ChannelsIf your cable box descrambles only some channels (such as premium channels), follow theinstructions below. You will need a two-way splitter, an RF (A/B) switch and four lengths of RF cable.(These items are available at most electronics stores.)SplitterCable BoxIncoming cable TV RearANT INRF (A/B) Switch1. Find and disconnect the cable that is connected to the ANT IN terminal on your cable box.This terminal might be labeled ‘ANT IN’, ‘VHF IN’ or simply, ‘IN’.N2. Connect this cable to a two-way splitter.3. Connect an RF cable between the OUTPUT terminal on the splitter and the IN terminal onthe cable box.4. Connect an RF cable between the ANT OUT terminal on the cable box and the B–IN terminalon the RF(A/B) switch.5. Connect another cable between the other OUT terminal on the splitter and the A–IN terminalon the RF (A/B) switch.6. Connect the last RF cable between the OUT terminal on the RF (A/B) switch and the ANT INterminal on the rear of the TV.After you have made this connection, set the A/B switch to the ‘A’ position for normal viewing. Setthe A/B switch to the ‘B’ position to view scrambled channels. (When you set the A/B switch to ‘B’,you will need to tune your TV to the cable box’s output channel, which is usually channel 3 or 4.)ANT INANT IN ANT OUTANT IN