Samsung Plasma TV User Manual
Also see for PS63A750: User manual
                                                                       | |
Contents
|
English - 11Plug & Play FeatureWhen the TV is initially powered on, basic settings proceed automatically and subsequently.1 Press the POWER button on the remote control. The message The MenuLanguage, Store Demo, Channels, and Time will be set. is displayed.Press the ENTERE button. Press the ◄ or ► button to select Store Demo or Home Use, then theENTERE button.We recommend setting the TV to Home Use mode for the best picture inyour home environment.Store Demo mode is only intended for use in retail environments.If the unit is accidentally set to Store Demo mode and you want to return to Home Use (Standard): Press the Volumebutton on the TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds.The Screen Saver is activated if there is no remote control key input for longer than 1 minute while Plug & Play isrunning.The Screen Saver is activated if there is no operating signal for longer than 15 minutes. Press the ▲ or ▼ button to select the channel source to memorize. Press the ENTERE button to select Start.Digital & Analogue: Digital and Analogue channels.Digital: Digital channels.Analogue: Analogue channels.The channel search will start and end automatically.Press the ENTERE button at any time to interrupt the memorization process.After all the available channels are stored, the message Set the Clock Mode. is displayed.4 Press the ENTERE button. Press the ▲ or ▼ button to select Auto, then press the ENTERE button.If you select Manual, Set current date and time is displayed. (See page 26)If you have received a digital signal, the time will be set automatically. If not, see page 26 to set the clock.5 Select the time zone where you are located. is displayed. Press the ▲ or ▼ button to highlight the time zone for your localarea (and to move the highlight to the appropriate time zone on the map of the Australia).Press the ENTERE button. The message Enjoy your viewing is displayed. When you have finished, press the ENTERE button.If you want to reset this feature...1 Press the MENU button to display the menu. Press the ▲ or ▼ button to selectSetup, then press the ENTERE button. Press the ENTERE button again to select Plug & Play. Enter your 4 digit PIN number. The default PIN number of a new TV set is‘0-0-0-0’.If you want to change PIN number, refer to 23 page.The Plug & Play feature is only available in the TV mode.NNNNNNNNNNNNNChannel ControlStoring Channels and channelAuto StoreYou can scan for the frequency ranges available to you (and availabilitydepends on your country). Automatically allocated programme numbers maynot correspond to actual or desired programme numbers.Digital & Analogue: Digital and Analogue channels.Digital: Digital channels.Analogue: Analogue channels.Scans for all channels with active broadcast stations and stores them in theTV’s memory.If you want to stop Auto Store, press the ENTERE button.The Stop Auto Store? message will be displayed.Select Yes by pressing the ◄ or ► button, then press the ENTERE button.If a channel is locked using the Child Lock function, the PIN input window appears.❑•••NNNNNSetup Plug & Play ►TimeNetwork Selection : CableWireless Network SetupCable Network SetupChild Lock : OffChange PINParental LockChannelAuto Store ►Manual StoreFull GuideMini GuideDefault Guide : Mini GuideChannel ListChannel Mode : Added Ch.Fine TunePlug & PlayThe Menu Language, Store Demo, Channels, and Timewill be set.OKE Enter |
Related manuals for Samsung PS63A750
manualsdatabase
Your AI-powered manual search engine