English - 4Preparing before installing Wall- Mount on the wall1 Install Wall Mount with the torque range of 15kgf·cm or less. Make sure that parts can be damaged if the torque is out of thespecified range. Accessory Kit contains Holder–Ring [①] for installing other company’s Wall-Mount on Samsung TV. (Case B)Case A. Installing SAMSUNG Wall-Mount Case B. Installing other company’s Wall-MountPulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your children do not hangover or destabilize the TV; doing so may cause the TV to tip over, causing serious injuries or death. Follow allsafety precautions provided on the included Safety Flyer. For added stability, install the anti-fall device for safetypurposes, as follows.To avoid the TV from falling:1 Put the screws into the clamps and firmly fasten them onto the wall. Confirm that the screws have been firmly installed ontothe wall.You may need additional material such as an anchor depending on the type of wall.Since the necessary clamps, screws, and string are not supplied, please purchase these additionally. Remove the screws from the center back of the TV, put the screws into the clamps, and then fasten the screws onto the TVagain.Screws may not be supplied with the product. In this case, please purchase the screws of the following specifications. Connect the clamps fixed onto the TV and the clamps fixed onto the wall with a strong string and then tie the string tightly.Install the TV near to the wall so that it does not fall backwards .It is safe to connect the string so that the clamps fixed on the wall are equal to or lower than the clamps fixed on the TV.Untie the string before moving the TV.4 Verify all connections are properly secured. Periodically check connections for any sign of fatigue for failure. If you have anydoubt about the security of your connections,contact a professional installer.NNNNNN경고 주의경고 주의Securing the TV to the WallWall Wall