English - 55Anynet+ MenuThe Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.Anynet+ Menu DescriptionView TV Anynet+ mode changes to TV broadcast mode.Device List Shows the Anynet+ device list.(device_name) Menu Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu ofthe DVD recorder will appear.(device_name) Operation Shows the play menu of the connected device. E.g. If a DVD recorder is connected, the playmenu of the DVD recorder will appear.Record: (*recorder) Starts recording immediately using the recorder. (This is only available for devices thatsupport the recording function.)(*recorder) Reserve Recording Enables reserving a recording for the recorder. (This is only available for devices that supportthe recording reservation function.)Stop Recording: (*recorder) Stops recording.Receiver Sound is played through the receiver.If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device isconnected, it will be represented as (*device_name).TV Remote Control Buttons Available in Anynet+ ModeDevice Type Operating Status Available ButtonsAnynet+ DeviceAfter switching to the device, whenthe menu of the correspondingdevice is displayed on the screen.Numeric buttons▲/▼/◄/►/ENTERE buttonsColour buttons / EXIT buttonAfter switching to the device, whileplaying a fileπ(Backward search) / μ(Forward search) ∫(Stop) / ∂(Play) /∑(Pause)Device with built-in TunerAfter switching to the device, whenyou are watching a TV programme P / buttonAudio Device When Receiver is activated VOL / buttonMUTE buttonThe Anynet+ function only works when the active source on the TV remote control is set to TV.The ∏ button works only while in the recordable state.You cannot control Anynet+ devices using the buttons on the TV. You can control Anynet+ devices only using the TV remotecontrol.The TV remote control may not work under certain conditions. In this case, reselect the Anynet+ device.The Anynet+ functions do not operate with other manufacturers’ products.The π, μ operations may differ depending on the device.RecordingYou can make a recording of a TV programme using a Samsung recorder.1 Press the TOOLS button. Press the ENTERE button to select Anynet+(HDMI-CEC). Press the ▲ or ▼ button to select Recording: (device_name), then press theENTERE button. Recording begins.When there is more than one recording deviceWhen multiple recording devices are connected, the recording devices arelisted. Press the ▲ or ▼ button to select a recording device and press theENTERE button. Recording begins.When the recording device is not displayedSelect Device List and press the red button to search devices. Press the EXIT button to exit.You can record the source streams by selecting Recording: (device_name).Pressing the ∏ button will record whatever you are currently watching. If you are watching video from another device, thevideo from the device is recorded.Before recording, check whether the antenna jack is properly connected to the recording device. To properly connect anantenna to a recording device, refer to the recording device’s users manual.NNNNNNNNNNNNView TVDevice ListRecording : DVDRDVDR OperationReceiver : OnSetupU Move E Enter R Return