Samsung Plasma TV User Manual
Also see for PS63A750: User manual
                                                                       | |
Contents
|
English - 54Setting Up Anynet+Anynet+(HDMI-CEC)Tools → Anynet+(HDMI-CEC) performs the same function.SetupAnynet+(HDMI-CEC) → Off / On: To use the Anynet+ Function, Anynet+(HDMI-CEC) must be set to On.When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+related operations are deactivated.Auto Turn Off → No / Yes: Setting an Anynet+ Device to turn OffAutomatically when the TV is Turned OffThe active source on the TV remote must be set to TV to use theAnynet+ function.If you set Auto Turn Off to Yes, connected external devices are alsoturned off when the TV is turned off. If an external device is still recording,it may or may not turn off.❑•N•NNScanning and Switching between Anynet+ Devices1 Press the TOOLS button. Press the ENTERE button to select Anynet+(HDMI-CEC). Press the ▲ or ▼ button to select Device List, then press the ENTEREbutton.Anynet+ devices connected to the TV are listed. If you cannot find a deviceyou want, press the red button to scan for devices.Only when you set Anynet+ (HDMI-CEC) to On in the Setup menu, theDevice List menu appears. Press the ▲ or ▼ button to select to a particular device and press theENTERE button. It is switched to the selected device.Switching to the selected devices may take up to 2 minutes. You cannot cancel the operation during the switching operation.The time required to scan for devices is determined by the number of connected devices.When the device scan is complete, the number of devices found are not displayed.Although the TV automatically searches the device list when the TV is turned on via the power button, devices connected tothe TV when the TV is on or under some conditions are not automatically displayed in the device list. Press the red button tosearch for the connected device.If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure toswitch to an Anynet+ device by using the Device List.NNNNNNNApplicationWISELINK ProAnynet+ (HDMI-CEC) ►Content LibraryInfoLiveProduct GuideDevice ListSetupU Move E Enter R ReturnView TVDevice ListRecording : DVDRDVDR OperationReceiver : OnSetupU Move E Enter R ReturnAnynet+ (HDMI-CEC) : ONAuto Turn Off : YesU Move E Enter R ReturnSet upOffOn |
Related manuals for Samsung PS63A750
manualsdatabase
Your AI-powered manual search engine