Samsung SADPCI-202 Instruction Manual

13Additional Information:When viewing a programme, pressing the info key will display the information banner.Note:If the receiver was previously working on a channel and the “No Signal” icon appears, you may haveone of the following problems:Signal degraded heavily by poor weatherChannel no longer broadcasting and no carrierwas detected.Dish not aligned to the correct satelliteLNB power switched off in the menuFaulty cable or LNB.The Signal and Data level meter:Press the Signal key during view mode to display the signaland data level for the current channel. Use this feature toassist dish alignment or fault finding should there be areception problem.Diagnostic Information:For more information on the receiving signal,press the INFO key to display the diagnosticScreen:The diagnostic screen displays detailed broadcastinformation in real time. Press INFO key again toreturn to the signal meters or ESC to return to thePicture.Memory Status:At any time you can check the memory status on you receiver.The indicator shows the amount of receiver memory used by the stored channels.Press:Menu, Channel Setup, Memory Status :Memory UsedAll channels are stored in memoryMemory UsedSignalDataUse INFO key for diagnostic info.Pic. Size: 544x576Frames/Sec: 25.00Asp. Ratio: 4:3Bits/Sec: 15000000AudioChannel: StereoEmphasis: OffSample Rate: 48.00kHzSAMSUNGSignalDataVideo