Samsung SCH-N101 User Manual

Contents

37364. Type in the current month, day, year, hour, and minute. Usethe left scroll key to backup to an incorrect entry if youneed to.When you get to the AM/PM setting, use the vol-ume key to select AM or PM, or press for AM orfor PM.5. Press to save the setting and return to Standby mode.The correct date and time will appear across the bottomof the display, and the correct day will appear under thebattery charge icon.Setting Your NAMYour Samsung phone can store two NAMs (NAM stands fornumerical assignment module - essentially your telephonenumber).This means you can have two phone numbers onyour phone, and you can quickly and easily switch your ser-vice back and forth between the two numbers.Note: Each NAM has an associated set of System Selectionsettings (see “System Selection” on page 38).Here’s how you select the NAM you want to use:1. Press to display the Main Menu.2. Press for Phone Setup.3. Press for Set NAM.4. Press the scroll keys to select NAM-1 or NAM-2.5. When the desired NAM displays, press to save the set-ting. If you change the NAM, the phone will reboot andacquire service using the new NAM setting.OKOKPQRS78 TUVMENUOKOKPQRS72 ABCTone Length SettingThe tone length setting enables you to select short or longDTMF (dual-tone multi-frequency) tones.When you use ateleservice (such as your bank account or voicemail service)and press the keys to enter numbers into the teleservice, youare sending DTMF tones.The system used by the bank orother service determines if you need short or long DTMFtones. If the service is digital (which most are these days)short DTMF will almost always work. However, some newsystems and almost all older (analog) systems require you touse long DTMF tones. Many home answering machinesrequire long DTMF tones.To set the DTMF tone length:1. Press to display the Main Menu.2. Press for Phone Setup.3. Press for Tone Length.4. Press the scroll keys to toggle between Short and Long.5. When the desired option displays, press to save thesetting.Setting the TimeThe clock is set and maintained automatically when yourphone is in digital mode.When you turn on your phone inanalog mode you must set the time and date for yourScheduler and Alarm. Here’s how to set the time and date.1. Press to display the Main Menu.2. Press for Phone Setup.3. Press for Set Time.6MNO8 TUVMENUOKOK5 JKL8 TUVMENUSCH-N101(eng) 4/6/00 11:53 AM Page 36