Samsung SCH-N101 User Manual

Contents

3938How to Setup For a Voice, Data, or Fax CallWhen you want to receive a data or fax call, you must set thephone to do this.When you are done with your data or faxcall, you must change this setting back to voice to receivevoice calls again. It’s easy. Here’s how to do it:1. Press to display the Main Menu.2. Press for Phone Setup.3. Press for Data / Fax.4. Press the scroll keys to select Incoming Data Only,Incoming Fax Only, or Off:Voice Call Only.5. When the desired option displays, press to save thesetting. If you have chosen to receive fax or data, then thephone will first display “No incoming voice calls can bereceived”, and then return to Standby mode with thewords “Data Only” or “Fax Only” displayed under the ban-ner.How to Setup the Web Browser PromptsYour phone has the capability to inform you when you startand end a Web Browser session. See “To Setup the WebBrowser Prompts” on page 99 to set this option.OKOK9 WXYZ8 TUVMENUSystem SelectionThe system selection feature of your phone enables you tochoose how your phone will roam.There are four choices,and they will affect your charges, so contact your serviceprovider to determine the best roaming methods for you.Thefour choices are:u Standard - with this setting, your phone will always tryyour calls using your home system, but if that doesn’twork, then it will use the preferred roaming system.u Home Only - with this setting, you cannot roam. If yourhome system is not available then your call will not beconnected and the No Service indicator ( ) is displayed.In some service areas an operator may come on line ask-ing you how you would like to pay for the call.u A Only - In a wireless service area, there are usually twoservice providers which are referred to as A and B.Yourservice provider will provide you information about thiswhen you setup service.With this setting, you will only beable to roam in the “A” network or system.u B Only - This works just like the “A Only” setting exceptyou will only be able to roam in the “B” network or sys-tem.To select the system:1. Press to display the Main Menu.2. Press for Phone Setup.3. Press for System Sel.4. Press the scroll keys to select the desired system. Choicesare Standard, Home Only,A Only, or B Only.5. When the desired option displays, press to save thesetting.OKOK8 TUV8 TUVMENUSCH-N101(eng) 4/6/00 11:53 AM Page 38