Dispaly104Language/ (Menu 7-3)Sets the language of menus and key-input.Select the desired language by pressing navigationkeys.The available languages are English and .Backlight (Menu 7-4)You have several options for setting how the LCDbacklight operates. Remember that backlight usedrains your battery faster.The following options are available:8/30 seconds: The backlight switches on whenyou press a key and switches off 8/30 seconds afterthat. Then the display turns off after 52/30seconds.Banner (Menu 7-5)This menu allows you to set a banner message tobe displayed at the bottom of the display in Standbymode.1. If necessary, press the C key to delete eachletter of the old greeting. Press and hold to clearthe display.2. Enter your banner message. For further detailsabout how to enter characters, see page xx.3. When you finish entering the message, press tosave the new banner.Dispaly105Dual Clock (Menu 7-6)You can choose two time zones to be displayedwhen you select Dual Clock for the Idle modeimage; for details, see page xx.To select time zones for the dual clock:1. When Location highlights, press the Down key.2. Select the time zone for the first clock bypressing the Left or Right key, and press theDown key.3. Select the time zone for the second clock bypressing the Left or Right key.4. Press the OK soft key to confirm the selection.To apply the daylight saving time:1. When Location highlights, press the Left orRight key to display DST. Press the Down key.2. Select Yes to use the daylight saving time forthe first clock. Otherwise, select No.3. Press the Down key and repeat step 2 for thesecond clock.4. Press the OK soft key to confirm the selection.Service LED (Menu 7-7)This menu allows you to select whether or not theservice light is used.