Samsung SCX-4600 Series User Manual

Also see for SCX-4600 Series: Manual Del Usuario Quick reference guide User guide Specifications Parts catalog

Contents

Media and tray_ 50• Do not run a sheet of labels through the machine more than once. Theadhesive backing is designed for only a single pass through themachine.• Do not use labels that are separating from the backing sheet or arewrinkled, bubbled, or otherwise damaged.Card stock/Custom-sized paperPostcards, cards and other custom-sized materials can be printed with thismachine.• Do not print on media smaller than 76 mm (3.00 inches) wide or 127 mm(5.00 inches) long.• In the software application, set margins at least 6.4 mm (0.25 inches)away from the edges of the material.• If media weight is over 160 g/m2 (43 lb), try printing in the rear cover(face up).Letterhead/ Preprinted paper• Letterhead/ Preprinted paper must be printed with heat-resistant ink thatwill not melt, vaporize, or release hazardous emissions when subjectedto the machine’s fusing temperature for 0.1 second. Check yourmachine’s specification to view the fusing temperature about 170°C(338°F).• Letterhead/ Preprinted paper ink must be non-flammable and should notadversely affect machine rollers.• Forms and letterhead should be sealed in a moisture-proof wrapping toprevent changes during storage.• Before you load letterhead/preprinted paper, verify that the ink on thepaper is dry. During the fusing process, wet ink can come off preprintedpaper, reducing print quality.Photo• Make sure not to use the inkjet photo paper with this machine. It couldcause damage to the machine.GlossyLoad one paper to the manual tray at a time, glossy side facing up.• Recommended media: Glossy paper (Letter) for this machine by HPBrochure Paper (Product: Q6611A) only.• Recommended media: Glossy paper (A4) for this machine by HPSuperior Paper 160 glossy (Product: Q6616A).SETTING THE PAPER SIZE AND TYPEAfter loading paper in the paper tray, set the paper size and type using thecontrol panel. These settings will apply to copy and fax modes. Forcomputer printing, select the paper size and type in the application programyou use on your computer (See "Opening printing preferences" onpage 53).The settings made from the machine driver override the settings onthe control panel.Setting the paper size1. Press Menu on the control panel.2. Press the left/right arrow until System Setup appears and press OK.3. Press the left/right arrow until Paper Setup appears and press OK.4. Press the left/right arrow until Paper Size appears and press OK.5. Press the left/right arrow to select the paper tray you want and pressOK.6. Press the left/right arrow to select the paper size you want.7. Press OK to save the selection.8. Press Stop/Clear to return to ready mode.If you want to use special-sized paper-such as a billing paper, selectEdit... in the Paper tab in the Printing Preferences (See "Openingprinting preferences" on page 53).Setting the paper type1. Press Menu on the control panel.2. Press the left/right arrow until System Setup appears and press OK.3. Press the left/right arrow until Paper Setup appears and press OK.4. Press the left/right arrow until Paper Type appears and press OK.5. Press the left/right arrow to select the paper tray you want and pressOK.6. Press the left/right arrow to select the paper type you want.7. Press OK to save the selection.8. Press Stop/Clear to return to ready mode.Setting the paper source1. Press Menu on the control panel.2. Press the left/right arrow until System Setup appears and press OK.3. Press the left/right arrow until Paper Setup appears and press OK.4. Press the left/right arrow until Paper Source appears and press OK.5. Press the left/right arrow until Copy Tray or Fax Tray appears andpress OK.6. Press the left/right arrow to select the paper tray you want.7. Press OK to save the selection.SINGLE-SIDED DOUBLE-SIDEDTray1 Face down Face upManual tray Face up Face downDownloaded From ManualsPrinter.com Manuals