Samsung SCX-4600 Series User Manual

Also see for SCX-4600 Series: Manual Del Usuario Quick reference guide User guide Specifications Parts catalog

Contents

Copying_ 61When you make a reduced copy, black lines may appear at thebottom of your copy.CHANGING THE DEFAULT COPY SETTINGSThe copy options, including darkness, original type, copy size, collation andnumber of copies, can be set to those most frequently used. When you copya document, the default settings are used unless they have been changedby using the corresponding buttons on the control panel.1. Press (Copy) on the control panel.2. Press Menu on the control panel.3. Press the left/right arrow until Copy Setup appears and press OK.4. Press the left/right arrow until Change Default appears and press OK.5. Press the left/right arrow until the setup option you want appears andpress OK.6. Press the left/right arrow until the setting you want appears and pressOK.7. Repeat steps 5 through 6, as needed.8. Press Stop/Clear to return to ready mode.While you are setting copy options, pressing Stop/Clear cancels thechanged settings and restores the defaults.USING SPECIAL COPY FEATURESYou can use the following copy features:ID card copyingYour machine can print 2-sided originals on one sheet of A4-, Letter-,Legal-, Folio-, Executive-, B5, A5, or A6-sized paper.The machine prints one side of the original on the upper half of the paperand the other side on the lower half without reducing the size of the original.This feature is helpful for copying a small-sized item, such as a businesscard.• This copy feature is available only when you place originals on thescanner glass.• The size of the 2-sided originals should be smaller than A5, if not,some of it won’t be copied.1. Press ID Copy on the control panel.2. Place Front Side and Press [Start] appears on the display.3. Place the front side of an original facing down on the scanner glasswhere arrows indicate as shown, and close the scanner lid.4. Press OK on the control panel.Your machine begins scanning the front side and shows Place BackSide and Press [Start].5. Turn the original over and place it on the scanner glass, where arrowsindicate as shown then, close the scanner lid.6. Press OK on the control panel to begin copying.• If the original is larger than the printable area, some portions maynot be printed.• If you don’t press the OK button, only the front side will be copied.• If you press Stop/Clear, the machine cancles the copy job andreturns to ready mode.2-up or 4-up copying (N-up)The machine reduces the size of the original images and prints 2 or 4 pagesonto one sheet of paper.1 21 23 41. Press (Copy) on the control panel.2. Press Menu on the control panel.3. Press the left/right arrow until Copy Feature appears and press OK.4. Press the left/right arrow until Layout appears and press OK.5. Press the left/right arrow until 2-Up or 4-Up appears and press OK.6. When Yes appears, press OK.7. Press Start on the control panel to begin copying.You cannot adjust the copy size using Reduce/Enlarge for the N-Upfeature.Poster copyingYour original will be divided into 9 portions. You can paste the printed pagestogether to make one poster-sized document.This copy feature is available only when you place originals on the scannerglass.1. Press (Copy) on the control panel.2. Press Menu on the control panel.3. Press the left/right arrow until Copy Feature appears and press OK.4. Press the left/right arrow until Layout appears and press OK.5. Press the left/right arrow until Poster Copy appears and press OK.6. Press Stop/Clear to return to ready mode.7. Press Start on the control panel to begin copying.Your original is divided into 9 portions. Each portion is scanned andDownloaded From ManualsPrinter.com Manuals