4.6 <Loading originals and print media>Changing the size of the paper in the paper trayTo load longer sizes of paper, such as Legal-sized paper, you need toadjust the paper guides to extend the paper tray.1 Adjust the paper length guide to the desired paper length. It ispreset to Letter or A4 size depending on the country. To loadanother size, hold the lever and move the length guide to thecorresponding position.Note• If you experience problems with paper feed, place one sheet ata time in the multi-purpose tray.• You can load previously printed paper. The printed side shouldbe facing up with an uncurled edge at the front. If youexperience problems with paper feed, turn the paper around.Note that print quality is not guaranteed.12 1 paper length guide2 paper width guide2 After inserting paper into the tray, while pinching the paper widthguide as shown, move it toward the stack of paper until it lightlytouches the side of the stack. Do not press the guide too tightly tothe edge of the paper; the guide may bend the paper.In the multi-purpose trayThe multi-purpose tray can hold special sizes and types of print material,such as transparencies, postcards, note cards, and envelopes. It is usefulfor single page printing on letterhead or colored paper.To load paper in the multi-purpose tray:Note• Do not push the paper width guides far enough to cause thematerials to warp.• If you do not adjust the paper width guides, it may cause paperjams.
