9.7 <Machine status and advanced setup>Remote ServiceThis option enables the machine send the notification to servicerepresentatives to inform them that the machine needs supplies such asa toner cartridge.1 Press Machine Setup on the control panel.2 Press Admin Setting. When the login message pops up, then enterpassword and press OK.3 Press the Setup tab > Remote Service.Analog Fax After installing the fax kit, select this optionEnable to use this machine as a fax machine.On DemandImage OverwriteYou can set the machine to delete previous jobinformation on HDD as you store new jobinformation. Set this option to Enable, go to theGeneral tab > On Demand Overwrite, pressStart in the display to start the overwriting job.Immediate ImageOverwriteIf you select Enable, the machine renews theHDD memory when you save new job on it.Option DescriptionRemote Service Select On to use Remote Service.Criteria Value Sets the machine to count printed pages or thenumber of days the machine will be used. Aftersetting up dates or number of pages, themachine will send a fax to the servicerepresentatives informing the machine hasused over set date, or did print job more thanset pages.Service Number Enter the fax numbers for the servicerepresentatives.Option Description Printing a reportYou can print a report on the machine's configuration or font list, etcetera.1 Press Machine Setup on the control panel.2 Press Admin Setting. When the login message pops up, then enterpassword and press OK.3 Press the Print/Report tab.Option DescriptionPrint You can print NetworkConfiguration, PS3 Font List,PCL Font List and ScheduleJobs Report. Schedule JobsReport shows the job list inpending, in delayed faxing or theMailbox list as well.AccountingReportSuppliesInformationYou can print the amount of eachcategory that your machine hasprinted so far.Network Auth.Log ReportIt displays user login IDs andemails.Usage PageReportYou can print the report on theamount of printouts depending onthe paper size and type.AccountingReportPrints the report of printing outcount for each login user.
